Machine Cleaning And Disinfection; Demolition And Dismantling - Tecno-gaz DEA Manual Del Usuario

10
For the cleaning of the heat-sealing machine, follow the fundamental rules of hygiene normally adopted for
similar equipment.
− First of all, switch the machine off and disconnect the plug from the socket.
− Wait for the machine to cool down, if it has been operating so far.
− Clean the machine using a wet sponge with soapy water and dry it with a dry and clean cloth.
− Do not use aggressive detergents, as they could cause permanent damage to the plastic parts of the
machine.
− Do not spray the machine directly with nebulizer jets, because they could damage the internal electrical
parts.
11
Directive on waste from electrical and electronic equipment (WEEE)
Pursuant to DIRECTIVE 2002/96/EC, this symbol shows that the product must not be
disposed of as urban waste at the end of its operating life.
The product must be taken to centers specialized in separate collection of electric and
electronic equipment or to a dealer, when a similar product is purchased.
The machine holder shall be responsible for bringing it to collection centers.
For further information about collection systems, address the local waste disposal
service.
Correct disposal of the equipment, which is no longer used, prevents negative
consequences for the environment and human health.
Abuses will be prosecuted by law.

MACHINE CLEANING AND DISINFECTION

DEMOLITION AND DISMANTLING

ENGLISH
26