Troubleshooting - Wagan Tech Smart AC 100W USB+ Manual De Usuario

Smart AC 100W USB+
®

TRoUBLeSHooTING

Problem: AC, DC, or USB product does not operate; green light is not
illuminated.
Probable cause
AC product connected is rated at more
than 90 watts; overload shutdown
occurs.
High starting surge has caused
overload shutdown even though AC
product connected is rated at less than
200 watts.
Lighter socket or 12 volt outlet may
require the vehicle's ignition to be
switched on.
Poor contact with lighter socket or 12
volt outlet.
Car battery is discharged.
fuse blown by heavy load.
Problem: Buzzing sound in audio systems.
Probable Cause: Inexpensive stereo systems have an inadequate internal power
supply filtering which causes a buzzing sound. A system with a high quality filter
is the only solution.
for additional technical support please e-mail customerservice@wagan.com
5
by Wagan Tech
™
Suggested solution
Use product with a power rating of less
than 90 watts.
Product exceeds inverter's surge
compatibility. Use a product with
starting surge power of less than 200
watts.
Turn the ignition key to accessory
position.
Press inverter firmly into the lighter
socket. Make sure the socket is clean.
Recharge the car's battery.
Replace the 15A slow blow fuse by
unscrewing the fitting in the positive
connector.
www.wagan.com
®