Lubricating The Blade - Ego Power+ HT2410 Manual De Funcionamiento

Orilladora inalámbrica de ion de litio de 56 voltios
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE:
Do not operate your hedge trimmer with dull or damaged cutting blades.
This may cause overload and will give unsatisfactory cutting results.

LUBRICATING THE BLADE

(Fig. 10)
For best operation and longer blade life,
lubricate the hedge trimmer blade with
light weight machine oil before and after
each use.
1. Remove the battery pack from the
hedge trimmer.
2. Lay the hedge trimmer on a flat
surface. Apply some light weight
machine oil along the edge of the top blade. If you will be using the hedge trimmer
for an extended period, it is advisable to stop, remove the battery, and oil the blade
during use.
NOTE:
Do not oil the blade while the hedge trimmer is running.
TRANSPORTING AND STORING
 Always place the blade guard on the blade before storing or transporting the
hedge trimmer. Use caution to avoid the sharp teeth of the blade.
 Clean the hedge trimmer thoroughly before storing.
 Store the hedge trimmer indoors, in a dry place that is inaccessible to children.
 Keep away from corrosive agents such as garden chemicals and deicing salts.
WARNING:
non-slip, heavy-duty, protective gloves. Do not place your hand or fingers
between blades or in any position where they could get pinched or cut. NEVER
touch blades or service the unit with battery pack installed.
22
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2410/HT2410-FC
Blades are sharp. When handling the blade assembly, wear
10

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ht2410-fc

Tabla de contenido