Adjusting Brightness; Adjusting Tint Of Picture; Adjusting Image Contrast; Adjusting Picture Quality - Alpine IVA-D106 Manual De Operación

Adjusting Brightness

Setting item: BRIGHT
Setting content: -15 ~ +15
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows "MIN" or "MAX" respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car's interior lighting as
long as AUTO is set in "Setting the Brightness of the Backlighting"
(page 40).

Adjusting Tint of Picture

Setting item: TINT
Setting content: G15 ~ R15
Adjust the color from G15 to R15. "G MAX" or "R MAX" is
displayed at the maximum of each color.
• Tint adjustment can be made only in the navigation, DVD, Video CD,
AUX modes.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
• When the picture from the external input is set to PAL, you cannot
adjust the TINT.

Adjusting Image Contrast

Setting item: CONTRAST
Setting content: -15 to +15
Adjustment of contrast is done in the range of -15 to +15. "HIGH"
and "LOW" appear as the maximum and minimum values
specified.
• When any NIGHT M. to CONTRAST setting item is selected, image
contrast is automatically adjusted according to the car's interior
brightness if AUTO is set in "Setting the Brightness of the
Backlighting" (page 40).
42
-EN

Adjusting Picture Quality

Setting item: SHARP
Setting content: -15 to +15
Adjustment of picture quality is done in the range of -15 to +15.
• Picture quality adjustment can be made only in the navigation, DVD,
Video CD, AUX modes.
• Picture quality adjustment cannot be made if a navigation system
with the RGB feature is connected.

Adjusting Color of Picture

Setting item: COLOR
Setting content: -15 ~ +15
You can adjust the color between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.
• Color adjustment can be made only in the navigation, DVD, Video
CD, AUX modes.
• Color adjustment cannot be made if a Navigation system with the
RGB feature is connected.

Storing VISUAL EQ

You can store the settings made for "Adjusting Image Brightness, Tint,
Depth, picture Quality and Contrast."
Setting item: USER MEMORY
Setting content: P-1 / P-2
1 After completing "Adjusting Brightness, Tint, Depth,
Picture Quality, and Contrast" (page 42), touch [ ] or
[ ] of USER MEMORY and then select preset No. "P-1"
or "P-2" to which the settings are to be stored.
2 After selecting a preset No., touch [MEMORY].
The adjusted VISUAL EQ mode is stored by the above
operations.
• You can recall the VISUAL EQ mode stored here from P-1 or P-2 of
"Selecting the VISUAL EQ Mode (Maker's setting)" (page 41).