Versatronic Standard - Ecolab Versatronic Instrucciones De Servicio Breves

Unit Description
4.3.1

Versatronic Standard

Table for version ES, see
Measuring
channel Inputs and outputs Explanation
Drainage 1 IN 7 *
or alternatively
IN 6
PWR 24V
IN 1
IN 4
OUT 3
OUT 14 ****
or alternatively channel 2 OUT 14/15
OUT 4
Drainage 2 IN 8 **
or alternatively
IN 12
IN 2
IN 5
OUT 2
OUT 15 ****
or alternatively
OUT 14/15
OUT 5
Drainage 3 IN 9
IN 3
IN 11
OUT 12
OUT 16/17
Drainage 4 IN 10
IN 13
IN 12 ***
or alternatively channel 2 IN 12
OUT 13 *
OUT 18/19
All drainages OUT 1
* If no measuring module is plugged into slot IN7, the assignment of the measuring signal source is automatically switched from
channel 1 to IN 6.
** If no measuring module is inserted at slot IN8 and at the same time an input board is available at slot IN12, the assignment of the
measuring signal source at channel 2 changes from IN8 to IN12.
*** Universal input IN12 can only be used as temperature input for channel 4 if the input is not already used as standard signal input 2
for measuring channel 2.
417102279 Rev. 2-08.2020
Base
Ä Chapter 5.2 'Material code' on page 16
Input Measuring signal (analog input)
Input Measuring signal Standard signal input 1
Power supply Standard signal input 1
Input Enable input 1
Temperature input
Controller output 1 (changeover contact)
Controller output 2 (make contact)
Standard signal output
Input Measuring signal (analog input)
Input Measuring signal Standard signal input 2
Input Enable input 1
Temperature input
Controller output 1 (make contact)
Controller output 2 (make contact)
Power supply Standard signal input 2
Standard signal output
Input measuring signal
Input Enable input 1
Temperature input
Controller output 1 (make contact)
Standard signal output
Input Measuring signal analog input
Input Enable input 1
Temperature input
Controller output 1 (make contact)
Standard signal output
Common alarm output for all drainages
12
Option board
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O