Additional Safety Instructions - ALPHA-TOOLS ASS 280 Instrucciones De Servicio

S-Hinweise Schleifgeräte

Additional safety instructions

This tool may only be used for dry grinding/
sanding operations.
Always guide the power cable away from the
back of the tool.
Use of the tool on materials containing asbestos
is prohibited.
Always remove the plug from the power supply
socket before carrying out any work on the
machine (cleaning the sander, changing the
sandpaper, etc.).
Always disconnect the machine by removing the
plug from the socket, not by pulling on the power
cable.
To protect your health, always wear safety
goggles and a dust mask during sanding work.
Keep your workplace clean and well illuminated.
Make sure that the workpiece is sufficiently secu
red so that it cannot slip.
Keep children away.
For your own sake, keep the machine clean at all
times and check it for signs of damage each time
after using it.
Make sure that the switch is set to OFF before
you insert the plug into the power supply socket.
Make sure of your footing, particularly when
working on ladders and platforms.
If you discover any damage to the machine, use
the exploded diagram and the spare parts list to
determine which parts need to be ordered from
Customer Service.
Important!
Wear safety goggles and a dust mask.
Keep the air slots in the orbital sander clean and
unblocked at all times.
Vibrations were determined in compliance with
ISO 5349.
Save this instructions.
07.04.2005 8:38 Uhr Seite 5
GB
5