DRAMINSKI TwistGrain Instrucciones De Uso página 26

The "Setup" menu enables you to select custom settings
for 3 submenus: Calibration, Language and Display .
Measurement Calibration
Modification Language
Setup Display
ESC OK ESC
t s
1. CALIBRATION
This submenu enables you to define new grain
species using the keypad .
Add
To add calibration data for a new species:
1 . Prepare some (from 2 to 14) grain samples of known
(laboratory-determined) moisture contents . The
levels of humidity have to be different so that the
new calibration covers the required measuring
range (e . g . , from 8 % to 20 %) . The temperature of
the samples and the instrument should be steady,
preferably within the 20-25 °C range .
24 CHAPTER 8 | SETUP
OK
t s
2 . Select "Setup" → "Calibration" → "Add" and press
"OK" to accept your selection .
The meter is ready for entering the new grain species
name:
Add
Edit
Delete
ESC OK ESC
t s
Press "t" or "s" to select a character and "OK" to
accept it . The maximum name length is 8 characters .
Finish entering the name by pressing "OK" slightly
longer after selecting the last character .
3 . Once you release the "OK" button, the meter will
display the message: "Pour in sample, tighten the cap" .
4 . Measure each of the laboratory-measured samples
using the standard procedure .
5 . After each measurement the meter will display the
mid-range value, 15 . 0 %, that you should change
to the laboratory-determined value using the "t"
or "s" button . Press "OK" to accept the new value .
Name:
A_
– + OK