Technical Data Charger And Battery (B); Function Of The Unit; Overview Ro Rh4000 (A); Start Of Operation - Rothenberger RO RH4000 Instrucciones De Uso

3 Technical Data charger and battery
Battery:
U = Voltage
C = Capacity
W = Weight
Ic = Charge current
t = Approx. charging time (90% full)
Charging voltage ............................ 20,75 V DC
Charging temperature ..................... 0° - 50° C
Max. discharging temperature. ....... 5° - 50° C
Recharge battery pack before first use!
4

Function of the Unit

4.1 Overview RO RH4000
Additional handle
1
Tool lock
2
SDS chuck
3
Depth stop
4
Switch button (for changing the operating
5
mode)
Lock
6
4.2

Start of operation

RO RH4000 (fig. A):
Assembly of the additional handle:
For safety reasons, always use the additional handle supplied!
Open the clamping ring by turning the additional handle (1) counter-clockwise. Push the ad-
ditional handle onto the collar of the machine.
Insert the depth stop (4). Securely tighten the additional handle at the angle required for the
application.
Removing and inserting the battery pack:
Removal:
Press the battery pack release button (14) and pull the battery pack (12) forwards.
To insert:
Slide the battery pack (12) in until it engages.
4.3

Operating

RO RH4000 (fig. A):
The machine's multifunctional monitoring system:
If the machine switches off automatically, the machine electronics have activated
automatic protection mode. A warning signal sounds (continuous beeping). The
beeping stops after a maximum of 30 seconds or when the trigger (10) is released.
Charger:
U1 = Input voltage
f1 = Input frequency
P1 = Input power
U2 = Charging voltage
I2 = Max. charge current
Nc = No. of battery cells
W = Weight
Pay attention to the electrical outlet
voltage! Check the label on the bottom
of the charger!
Eyelet for securing the carrying strap
8
Rotation selector switch
9
10 Trigger
11 Handle
12 Battery pack
13 LED lights
14 Battery pack release button
ENGLISH
(B)
(A)
19