Focal TRIO6 BE Manual De Uso página 13

Ocultar thumbs Ver también para TRIO6 BE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
English
READ FIRST !
IMPORTANT SAFETY INSTRUCTIONS !
The bolt of lightning in an equilateral tri-
angle warns the user that the device has
high voltage that could result in a risk of
electric shock..
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near
water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer's instructions.
8. Do not install near any heat
sources
such
as
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
9.
Do
not
defeat
purpose of the polarized plug.
A polarized plug has two blades
with one wider than the other. The
wide bladed is provided for your
safety. If the provided plug does
not fit into your outlet, consult an
electrician for replacement of the
obsolete outlet.
10. Protect the power cord from
being
walked
on
or
particularly at plugs, convenience
receptacles, and the point where
they exit from the apparatus.
11.
Only
use
attachments/
accessories
specified
manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during
lightning storms or when unused
for long periods of time
Warning: To prevent any risk of electric shock,
do not remove the cover (or the back) from
the device. There are no user-serviceable
parts in this device. For maintenance or
repairs, contact a qualified professional.
14. Refer all servicing to qualified
service
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
radiators,
15. This product is a device belonging
to Class 1. Only plug in the device
using the mains plug provided, which
incorporates an earth connection.
the
safety
The device must be plugged into an
earthed mains socket.
16. When the On/Off switch, or the
mains plug or adapter connected to
the product is used as a disconnect
device, this device must remain
readily accessible.
17. WARNING: To reduce the risk of
fire or electric shock, do not expose
this apparatus to water, rain or
pinched
moisture. And the apparatus shall not
be exposed to dripping or splashing
and that no object filled with liquids,
such as vases, shall be placed on the
apparatus.
by
the
18.
Do
openings.
19. Do not insert any objects into the
device's ventilation openings. They
could come into contact with one
of the high-voltage components or
short-circuit them and cause a fire or
electric shock. Do not spill liquid on
the device.
20. Do not attempt to repair this
device yourself. Opening it may
expose you to hazardous voltages
or to other risks. Contact a qualified
professional
work.
21. The equipment shall be used at
maximum 35 degree Celsius ambient
temperature (95°F).
22. Do not use this device in tropical
climates.
23. Do not use this device at altitudes
of more than 2,000 m (6,500 ft).
24. Do not overload wall sockets,
extension leads or multiple socket
outlets as this could cause fire or
electric shock.
25. The device must not be mounted
to a wall or ceiling unless intended by
the manufacturer.
The exclamation mark in an equilateral tri-
angle warns the user that the manual con-
tains important instructions on how to use
and look after the device.
personnel.
Servicing
is
not
obstruct
ventilation
for
all
maintenance
26. If the product has been
transported from a cold to a warm
environment, make sure that no
condensation has occurred before
connecting the power cord.
27. No naked flame sources, such
as lit candles, should be placed on
top of the device.
28. The product should only be
connected to the mains power
type shown on the label on the
device. If you're not sure what
type of mains electrical supply
you have, ask your retailer or your
electricity supplier.
For devices
intended for use with a battery
or another power source, see the
user manual.
29. Always leave a distance of
at least 5 cm (2") around the
product for proper ventilation.
30.
When
replacement
components are needed, make
sure
that
the
maintenance
technician uses the components
recommended
by
the
manufacturer
or
components
with the same technical features
as the original product. Using
non-compliant components could
cause fires, electric shocks or
other risks.
31. After any maintenance or
repair work on the device, ask the
maintenance technician to test it
to check that it works safely.
32. To avoid damaging your
hearing,
do
not
listen
to
loudspeakers at high volumes for
long periods of time.
Listening to speakers at high
volumes can cause damage to
the user's ears and may lead to
hearing problems (temporary or
permanent deafness, buzzing in
the ears, tinnitus, hyperacusis).
Exposure to excessive volumes
(over 85 dB) for more than
one hour can cause irreparable
damage to your hearing.

Publicidad

Tabla de contenido
loading

Tabla de contenido