Oase Bitron C Instrucciones De Uso página 6

- English -
BioSmart
This section describes the connection of the UVC clarifying unit Bitron with a pump fed system.
● Please adhere to the instructions for use of the flow-through filter.
1. Insert the outlets with flat seals through the holes in the container wall.
2. Fitting the inlet: Screw the inlet nozzles with the O rings onto the outlets and hand tighten.
3. Closing the bypass (optional): Screw the cover cap onto the outlet instead of the inlet nozzle.
4. Connect the Bitron to the filter pump. (See Connecting the inlet)
BioTec ScreenMatic
● Please adhere to the instructions for use of the flow-through filter.
1. Insert the outlets with flat seals through the holes in the container wall into the distributor.
2. Screw the distributor nuts with the O rings onto the outlets and hand tighten.
3. Connect the Bitron to the filter pump. (See Connecting the inlet).
BTN0040
BTN0041
6