Date/Time Setting - JVC GZ-MS130 Manual De Instrucciones

Date/Time Setting

Q
Open the LCD monitor to
turn on the camcorder
Power Button
LCD monitor
Select [YES] within
R
10 seconds
Slide your finger up and down on
the sensor. Then touch OK
SET
•
When the message disappears, press the
power button for at least 2 seconds to turn
off the power, and then press it again for at
least 2 seconds.
•
Touch the sensors with your finger. The
sensors do not function if you touch them
with your finger nail or with gloves on.
.
SET DATE/TIME!
YES
NO
S
Select [CLOCK SETTING]
SET THE CITY, DATE AND TIME
Select the city closest to
T
the area where you use
the camcorder
AREA SETTING
U
Select [ON] if daylight
saving time is effective.
SET DAYLIGHT SAVING TIME
SET
R
V
Set the date and time
Touch sensor: Sets the date and time
}: Moves the cursor to the right
OK: Clock starts
CLOCK SETTING
SAVE
CLOCK ADJUST
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
QUIT
SET
NOV.1.2009 04:55PM
QUIT
SET
SET FOR DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME (DST)
OFF
NOV.1.2009 04:55PM
QUIT
DATE TIME
NOV 1 2009 4 55 PM
GMT+ 9:00
QUIT
EN5