LaserLiner MasterCross-Laser 360 Manual De Instrucciones página 9

1
10
10 10
1 Laser emitting window
2 Slide switch
a OFF / Transport lock /
Slope mode
b ON
3 Battery compartment
(bottom)
Horizontal and vertical levelling
2
Release the transport restraint, slide the slide switch (2) to the right. The laser cross and the two plumb
lasers appear. The laser lines can be switched individually with the selection button.
LASER LASER
The transport restraint must be released for horizontal and vertical levelling. The laser lines
!
and the plumb lasers flash when the device is outside the automatic levelling range of 3°.
Position the device such that it is within the levelling range. The light of the laser lines and
plumb lasers is constant.
MasterCross-Laser 360
2
b
a
3 3
4 4
5 5
4 5/8" tripod threads
(bottom)
5 1/4" tripod threads
(bottom)
6 Hand receiver mode
7 LED Hand receiver mode
LASER LASER
7
6
When transporting always
!
switch off all lasers, secure
pendulum and slide the slide
switch to the left!
8 LED Status indicator
9
Laser line selection button /
Slope mode on
10
Laser emitting window,
plumb laser
LASER
8
9
EN 09