General Safety Instructions - LaserLiner MasterCross-Laser 360 Manual De Instrucciones

Read the operating instructions and the enclosed brochure „Guarantee and additional notices"
!
completely. Follow the instructions they contain. This document must be kept in a safe place
and if the laser device is passed on, this document must be passed on with it.
Function / Application
Automatic cross-line laser with 360° horizontal laser circle and plumb function
– The slope-mode feature is an extra that permits gradients to be laid out.
– Additional plumb laser at top and bottom
– Individually selectable laser lines and plumb laser
– Out-Of-Level: is indicated by optical signals when the unit is outside its self-levelling range.
– With the magnetic clamp and wall bracket the device can be used as a standalone unit,
in a combination as well as in horizontal and vertical position.
– Automatic levelling range 3°, accuracy 0.2 mm / m

General safety instructions

– The device must only be used in accordance with its intended purpose and within the scope
Do not stare into the beam!
< 1 mW · 635 / 640 / 660 nm
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes and
immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)
– Do not use the laser at eye level (1.40 ... 1.90 m)
– In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
– Tampering with (making changes to) the laser device is not permitted.
– This device is not a toy - keep out of the reach of children.
Laser radiation!
Class 2 laser
EN 60825-1:2014
MasterCross-Laser 360
EN 07