Safety Information; Inserting Battery - LaserLiner PowerCheck Manual Del Usuario

Safety information

– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The tester operates in the voltage range from 1.2V to 9.0V.
Make sure the inserted, correspondingly rated batteries only
make contact at the marked contact surfaces.
– Insert the batteries the right way round to ensure correct polarity;
polarity reversal can adversely affect operation of the device.
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications. Modifications
or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
Additional information on use
The scale divides the usability of batteries in mobile devices into
„good", „weak" and „replace".
The divisions are based on general average values for constant use
and can vary in devices with abnormal current consumption.
Especially in devices with high, temporary current peaks and/or for
inferior quality batteries, it may be necessary to change the battery
earlier than indicated on the display.
Devices with efficient power management can generally still operate
effectively even when the batteries are almost completely discharged.
In such cases, try to interpret the reading on the LC display in terms
of the running time of your specific devices/batteries in order to
guarantee optimum battery utilisation.
1

Inserting battery

Open the battery compartment
and insert battery according to
the symbols. Be sure to pay
attention to polarity.
PowerCheck
GB
07