Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Digital bubble level:
The digital bubble level is used to align objects.
2 sec
Memory function:
The device has 50 storage locations.
Important notices
– The laser points to the location that will be measured.
No objects may get into the laser's line of measurement.
– The device compensates the measurement for different room temperatures.
Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
– The device is only conditionally useable in outdoor areas and cannot
be used in strong sunlight.
– The measurement results of outdoor measurements may be influenced
or falsified by rain, fog and snow.
– In unfavourable conditions, e.g. with poorly reflecting surfaces,
the maximum deviation may be greater than 3 mm.
– Carpeting, upholstery or curtains will not reflect the laser optimally.
Measure to flat surfaces.
– Measurements made through glass (window panes) can falsify
measurement results.
– An energy-saving function switches the device off automatically.
– Clean with a soft cloth. Water may not be allowed to penetrate
the housing.
Error code:
Err 1:
Received signal too weak
Err 2:
Received signal too strong
Err 3:
Replace the battery
Err 4:
Error in memory
24
EN
01 ... 50
Err 5:
Error in calculation with
Pythagoras' theorem
Err 6:
Outside the measuring range
Err 7:
Error in camera
Err 8:
Error in inclination sensor
Publicidad
Tabla de contenido
