General Safety Instructions - LaserLiner DistanceMaster Vision Manual De Instrucciones

Completely read through the operating instructions, the „Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Function / Application
Laser distance meter with camera function
– For measuring length, area and volume
– Min/Max continuous measurement, wall surface function, angle function,
Pythagoras 1 + 2 + 3, addition and subtraction function, digital bubble level,
stake out function and 360° inclination sensor
– Camera function with 8x digital zoom and viewfinder to target
the measurement area

General safety instructions

– The device must only be used in accordance with its intendedpurpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach
of children.
– Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail
or the battery charge is weak.
– This device is designed for charging 1.2V AAA rechargeable nickel metal
hydride (NiMH) batteries.
– On no account attempt to charge any other batteries as this could
irreparably damage the device or cause serious injuries.
– Only charge rechargeable batteries of the same size, of the same type,
same capacity and from the same manufacturer together.
– Please ensure compliance with the safety regulations set out by local and
national authorities with regard to the correct and proper use of the device.
14
EN