Safety Instructions - LaserLiner DistanceMaster Vision Manual De Instrucciones

Safety instructions

Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Tampering with (making changes to) the laser device is not permitted.
– Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars)
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers – may apply.
Electronic devices can potentially cause hazards or interference or
be subject to hazards or interference.
– The measuring accuracy may be affected when working close to high
voltages or high electromagnetic alternating fields.
Inserting rechargeable batteries
Open the battery compartment and
insert the rechargeable batteries
(3x NiMH, type AAA) as indicated
by the installation symbols.
Be sure to pay attention to polarity.
The rechargeable batteries can be
charged in the device with the supplied
USB charging cable.
DistanceMaster Vision
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014
–
15
EN