General Safety Instructions; Inserting The Battery - LaserLiner SensoLite 110 Manual De Instrucciones

General safety instructions

– The device must only be used in accordance with its intended purpose and
within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures, moisture
or significant vibration.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations
and limit values in accordance with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations
or in the vicinity of people with pacemakers – may apply. Electronic devices
can potentially cause hazards or interference or be subject to hazards or
interference.

Inserting the battery

Open the battery compartment and
insert batteries according to the symbols.
Be sure to pay attention to polarity.
Working with the laser receiver
Set the rotary laser to maximum speed and switch the laser receiver on.
It is able to detect the laser beam at a great distance now. Move the
SensoLite up and down through the laser beam until the middle indicator
(13) appears. Mark the measured height at the perimeter marking groove.
SensoLite 110 / SensoLite 110 G
–
+
07
EN