Switching Off - tomado TEB1802G Instrucciones De Uso

Use
The electric overblanket can be used as overblanket, plaid or overblanket on the bed.
• First connect the switch to the connection point in the blanket by connecting the plug.
• Then insert the plug in the socket.
Switching on
Press the ON/OFF button
heating position from 1 to 9.
Setting the heating position
Position 1: minimum heating - suitable for continuous use
Positions 2-3: gradual heating - suitable for heating up the blanket
Position 4-8: separately adjustable heating
Position 9: maximum heating
WARNING: If the electric overblanket is used for several hours,
we recommend setting the lowest heating position (position 1)
to prevent the user from overheating.

Switching off

Press the ON/OFF button
ATTENTION
If the electric overblanket is not used for a number of days, you must switch it off with the ON/OFF button
remove the plug from the socket. Then disconnect the switch from the electric overblanket by removing the plug.
Automatic deactivation function
This electric overblanket is switched off automatically after 20 minutes. If you want to use the blanket for a longer period of time,
you can extend the deactivation time by up to 3 hours. The deactivation time is indicated in 9 positions with a point - 1. - 2. etc.
Repeatedly press the AUTO OFF button
Position 1. = 20 minutes - standard setting
Position 2. = 40 minutes
Position 3. = 60 minutes
Position 4. = 80 minutes
Position 5. = 100 minutes
Position 6. = 120 minutes
Position 7. = 140 minutes
Position 8. = 160 minutes
Position 9. = 180 minutes - maximum
When the electric overblanket is switched off, it is no longer heated and the display is off.
The switch on the overblanket again, press the ON/OFF button and set the electric overblanket to the required heating position.
to switch on the blanket. The display switches on. Press the temperature button to set the required
to switch off the blanket. The display no longer lights up.
to delay the deactivation time.
EN - 18
and