Switching Off - tomado THP0401W Instrucciones De Uso

Switching on
Slide the ON/OFF and heating positions slider to heating position 1, 2 or 3 to switch on the heating pad. In activated condition,
the led of the selected heating position lights up.
Setting the heating position
Position 0: OFF
Position 1: minimum heating
Position 2: medium heating
Position 3: maximum heating
ATTENTION
The heating pad heats up the fastest when you first switch on the highest temperature level.
ATTENTION
The heating pad has been provided with turbo heating, which ensures quick heating within the first
10 minutes.
WARNING: If the heating pad is used for several hours,
we recommend setting the lowest heating position (position 1)
to prevent the user's body part to be heated from overheating
and prevent possible resulting burns.
Automatic deactivation function
This heating pad has been provided with an automatic deactivation function. This means that the supply
of heat is stopped approx. 90 minutes after the heating pad was activated. This is indicated by the flashing
heating position display. In order to be able to use the heating pad again, you must first slide the ON/OFF and
heating positions slider to position 0 (OFF). After approximately 5 seconds you are able to switch the heating
pad on again.

Switching off

Slide the ON/OFF and heating positions slider to the OFF position (0) to switch off the heating pad. The heating positions no
longer light up.
ATTENTION
If the heating pad is not being used, switch the ON/OFF and heating positions slider to the OFF position (0) and remove
the plug from the socket. Then disconnect the switch from the heating pad by removing the plug.
EN - 15