tomado TAF5001B Instrucciones De Uso página 18

The hot air fryer can be used to prepare a wide range of dishes.
1. Check that the voltage corresponds with what is stated on the information plate and insert the plug in an earthed socket.
The full display briefly lights up and the hot air fryer is in the standby position. The standby key
2. Carefully remove the pan from the hot air fryer by its handle.
3. Place the ingredients in the basket. Caution: never exceed the recommended volume and never fill the basket above the
maximum, because in that case the food could make contact with the heating element.
4. Properly slide the pan back in the hot air fryer. Never use the pan without the basket. If the pan is not properly placed in
the hot air fryer, the appliance will not function.
Caution: do not touch the pan during and shortly after use, as it gets very hot. Only hold the pan by its handle.
5. Press the standby key
6. Select an automatic menu with the easy control menu button or set the time MIN ( 1 - 60 minutes ) and temperature °C
( 80 - 200°C ) yourself using the accompanying
Tip: add 3 minutes to the cooking time when the hot air fryer is cold.
7. Then press the easy control menu button to switch on the hot air fryer.
• The display alternates between the set time and set temperature.
• The display shows the remaining time. Time and temperature can be adjusted during frying by pressing the accompanying
or keys.
During hot air frying, the fan symbol
• Excess oil dripping from the ingredients is collected in the pan.
8. Some ingredients must be shaken halfway the cooking time. Take the pan from the hot air fryer by its handle and place it
on a heat-resistant surface, such as a pan coaster. Press the release button of the handle and lift the basket from the pan.
Shake the contents of the basket above the pan to prevent leaking and click back the basket in the pan.
When you remove the pan from the hot air fryer, the hot air frying process is interrupted.
Caution: the display switches off completely. When you place the pan back in the hot air fryer, the display switches on and
hot air frying is resumed automatically.
9. Then slide back the pan in the hot air fryer to continue frying. When you place the pan back in the hot air fryer, the display
switches on and hot air frying is resumed automatically.
10. As soon as the set time has elapsed, the hot air fryer automatically switches to the standby position: The fan does
continue to run in order to allow the hot air fryer to cool down. After approximately 20 seconds, 5 beeps will sound and
the fan symbol is switched off. Pull the pan from the hot air fryer by its handle and place it on a heat-resistant surface,
such as a pan coaster.
Check that the ingredients are cooked.
If the ingredients are not yet cooked, place the pan back in the hot air fryer, add a number of extra minutes to the timer
and then press the easy control menu button.
11. To remove small ingredients (such as fries), press the button of the handle and lift the basket from the pan.
Do not hold the basket upside down while the pan is still attached. The excess fat accumulated on the bottom of the pan
will spread all over the ingredients.
After hot air frying, the pan and the ingredients are hot. Depending on the type of ingredients, it is possible that steam
comes out of the pan.
After hot air frying, the pan and the metal interior are very hot, avoid contact with these components.
12. Empty the basket onto a dish or plate. In case of large ingredients, use tongs.
PAUSE
• Press the easy control menu button to pause the hot air frying process. Press the easy control menu button once more
to resume the hot air frying process.
• The hot air frying process is also paused when you remove the pan from the hot air fryer.
Caution: the display switches off completely.
When you place the pan back in the hot air fryer, the display switches on and the hot air frying process is resumed.
HOT AIR FRYING
to switch on the hot air fryer. The display shows the preset of 190°C and 15 minutes.
and
flashes.
keys.
EN - 18
lights up.