Operation - Diehl Sharky 774 Instrucciones De Montaje

English
Due date loop (2)
Sequence Window 1
2.1 Due date 1 date
2.2 "Accd 1"
2.3 Due date 1 previous
year date
2.4 Due date 2 date
2.5 "Accd 2"
2.6 Due date 2 previous
year date
Information loop (3)
Sequence Window 1
3.1 Actual date
3.2 "SEC_Adr"
3.3 "PRI_Adr 1"
3.4 "Inlet" / "Outlet" * (installation position) depending on the setting (5.1 on page
3.5 "UHF ON" (status of integrated radio)
3.6 Software version
Tariff loop (5)
Month loop (6)
Sequence Window 1
6.1 "LOG"
6.2 "LOG"
: :
6.24 "LOG"
* Example 1Only for heat meters with activated cooling tariff
8.

Operation

Use the push button to page through the individual displays. When doing
so a differentiation is made between short and long button presses. With a
short button press (<3 seconds) you get to the next display within a loop;
with a long button press (>3 seconds) you get to the next display loop.
The "Energy" window (sequence 1.1) of the main loop is the basic display.
If the button is not pressed for approx.4 minutes, the meter automatically
switches off the display to save power (exception: an error exists). If you
press the button again, the meter returns to the basic display.
Window 2
Due date 1 energy
Date of future due date 1
Due date 1 previous year
energy
Due date 2 energy
Date of future due date 2
Due date 2 previous year
energy
1
Window 2
Date-1
Date-2
:
Date-24
Window 3
"Accd 1"
"Accd 1L"
"Accd 2A"
"Accd 2L"
Window 2
Secondary address
Primary address
21)
Check sum
Window 3 Window 4
Energy Volume
Energy Volume
: :
Energy Volume
-25-