Display - Diehl Sharky 774 Instrucciones De Montaje

ƒ
Connection for 2 x 2.5 mm²;
ƒ
Power consumption: One M-Bus load
7.

Display

The data generated by the calculator can be viewed in several displays.
These displays contain the assigned system information (e.g. energy
quantities, water volumes, operating days, water quantities, actual tem-
peratures, maximum values) and can be accessed by calling the displays
in the pre-defined sequence / loop. The energy meter has up to 6 diffe-
rent display sequences.
Main loop, due date loop, information loop, month loop.
The month loop comprises up to seven readings alternatingly displayed
for 2 s - 4 s each. For quick visual identification, the loops are labelled
1 to 6 in the display. As standard, the main loop contains the actual
data, e.g. energy, volume, flow and temperatures. The verified register is
marked with a padlock icon.
Main loop (1)
Sequence Window 1
1.1 Accumulated energy
1.2 Accumulated volume
1.3 Accumulated cold energy (heat meters
with cooling tariff)
1.4 Flow
1.5 Power
1.6 Flow temperature
Return flow temperature *)
1.7 Differential temperature
1.8 Operating days
1.9 Error status
1.10 Display test
*) without a decimal place; **) with one decimal place respectively
-24-
English
Window 2
Return flow temperature **)
Error hours