Locking Video; File Management On Your Computer; Connect The Camera To Your Computer - Velleman CAMCOLVC20 Manual Del Usuario

You can lock or unlock a specific file or all files at once.
1.
Press the button M to set the camera to playback mode.
The file type icon appears in the top left corner of the display
o
The display shows the most recent video or picture.
o
2.
Select the option you want (Lock Current - Unlock Current - Lock All -
Unlock All) and press OK.
3.
Select OK and press the button OK to confirm.

Locking video

You can lock a video directly while recording, as follows:
1.
While the camera is recording, press the button Lock video
2.
When you stop recording, the camera will save the video as a
protected file.
You can also lock a video through the Protect function in the camera menu.
(see section Locking pictures above to see how).

9. File management on your computer

While the camera is connected to your computer with the USB cable, you
can view and manage files from your computer.

9.1 Connect the camera to your computer

1. Use the included USB cable to connect the camera to your computer.
2.
Select Mass Storage and press the button OK.
3. On first use, your computer will install the appropriate drivers.
4. You can now access the video and pictures on the SD card through
your computer's file management system.
5. All video and pictures are in the folder \DCIM on the SD card.
Note: you cannot use the camera functions while the camera is connected to
your computer.
9.2 View files
You can view video or pictures as any other media file on your computer.
9.3 Delete files
You can delete files directly from the SD card.
•
V. 01 – 23/07/2013
CAMCOLVC20
7
.
©Velleman nv