Publicidad
Idiomas disponibles
Idiomas disponibles
1.- ASSEMBLY INSTRUCTIONS.-
Take the unit out of its box and make
sure that all of the pieces are there:
The assistance of a second person
is recommended when assembling
this unit Fig.1.
(61) Main body.
(91) Main post.
(1)
Monitor.
(9L) Top focus bar, left.
(9R) Top focus bar, right.
(83) Rear
stabiliser
adjustable feet.
(85) Front stabiliser bar with wheels.
(19) Handlebar tube.
(26L) Bottom focus bar, left.
(26R) Bottom focus bar, right.
(34L) Pedal left foot.
(34R) Pedal right foot.
(25) Focus bar spindle.
(35L) Left footrest.
(35R) Right footrest.
(3L) Front post cover.
(3R) Rear post cover.
(8R) Covers main post right (R).
(8L) Covers main post left (L).
(22F) Focus bar spindle covers (L).
(22R) Focus bar spindle covers (R).
(27F) Bottom trim covers, left for the
knuckle joints on the focus bars.
(27R) Bottom trim covers, right for the
knuckle joints on the focus bars.
(48L) Bottom cover, left foot.
(48R) Bottom cover, right foot.
(50) Cover.
(88) Bottom post cover.
(94) Transformer.
Fig.2
(2)
Screws M-5x12.
(4)
Screws M-4x15.
(12) Screws M-8x20.
(13) Spring washer M-8.
(14) Flat washer M-8x36x3.
(16) Allen screw M-8x36.
(17) Self-locking nuts M-8.
(20) Screws M-8x20.
(21) Screws M-5x10.
(24) Flat washer 19,5x38x0,5.
(28) Screws M-4,5x25.
(29) Allen screw M-10x85.
(30) Plastic bushing.
(31) Iron bushing.
(32) Flat washer M-10.
(33) Self-locking nuts M-10.
(36) Head caps.
(37) Screw DIN 603 M-6x50.
bar
with
(39) Flat washer M-6.
(40) Spring washer M-6.
(41) Knob.
(43) Flat washer M-8x21x2.
(45) Spring washer M-8.
(47) Screws M-5x7,5.
(84) Allen screw M-8x70.
(90) Flat washer M-8.
Allen key 5mm
Box spanner.
2.- FITTING THE STABILISER
BARS.-
Bring the front stabiliser bar with
wheels (85) to the main body (61)
positioning the wheels at the front of
the unit, Fig.3, inserts screws (84).
Use the 5mm Allen key to tighten
securely.
Next fit the cover (50) Fig.3.
Take the rear stabiliser bar with
adjustable feet (83), Fig.4, insert the
bolts (84); and tighten securely.
3.- FITTING THE BOTTOM POST
COVER.-
Take the main post (91) and insert the
bottom post cover (88) in the direction
of the arrow, Fig.5.
15
Publicidad
