Maintenance & Servicing; Technical Specification - Stuart SB2 Instrucciones De Funcionamiento

Maintenance & servicing
WARNING: Ensure the unit is disconnected
from the mains electricity supply before
attempting maintenance or servicing.
Periodically clean the instrument using a damp
cloth and mild detergent solution. Do not use
harsh or abrasive cleaning agents.
Any repairs or replacement of parts MUST be
undertaken by suitably qualified personnel.
For a comprehensive list of parts required by
service engineers conducting internal repairs and
a service manual, please contact the Technical
Service Department of Bibby Sterilin Ltd. quoting
both the model and serial number.
Only spare parts supplied or specified by Bibby
Sterilin Ltd. or its agents should be used. Fitting
of non-approved parts may affect the
performance and safety features designed into
the instrument.
If in any doubt, please contact the Technical
Service Department of Bibby Sterilin Ltd. or the
point of sale.
Bibby Sterilin Ltd
Stone
Staffordshire ST15 0SA
United Kingdom
Tel: +44 (0) 1785 812121
Fax: +44 (0) 1785 813748
E-mail equipment@bibby-sterilin.com
www.bibby-sterilin.com

Technical specification

Speed
Speed display
Timer
Dimensions (w x d x h)
Weight
Electrical supply
SB2
Fixed - 20 rpm
None
No
200 x 270 x 240 mm
3.2 Kg
230V / 50Hz, 50W
Warranty
Bibby Sterilin Ltd warrants this instrument to be
free from defects in material and workmanship,
when used under normal laboratory conditions,
for a period of two (2) years. In the event of a
justified claim Bibby Sterilin will replace any
defective component or replace the unit free of
charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused by
incorrect installation, adaptation, modification,
fitting of non approved parts or repair by
unauthorised personnel.
SB3
Variable - 2 to 40 rpm
Digital
Yes – up to 999mins
200 x 270 x 240 mm
3.2 Kg
230V / 50Hz, 50W
3