Descargar Imprimir esta página

Facom DT.PSA Manual De Instrucciones página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
DT.4360C1, DT.4360C2, DT.4360C4, DT.4360C5, DT.4360M8 & DT.4360P4
Locking Pins – Camshaft and Injection Pump,
Citroen/Peugeot engines have access holes through pulleys/sprockets and fixed datum holes
on the engine to allow the camshaft, injection pump to be 'locked' in their timed positions
by use of correctly sized locking pins - - refer to Application Charts.
Tensioner Adjustment Tools
DT.4360T4 Retaining Tool
DT.4362 & DT.4363 Tensioner Adjusters
DT.4360T4 Tensioner Tool (Dynamic Roller) is essential for use on the Auxiliary Belt tensioner,
when air conditioning/power steering is installed
DT.4362 and DT.4363 are specialised wrenches for adjusting the timing belt tensioners..
DT.4362 provides fits onto the square drive on belt tensioners on XUD11/DK/DJ engines.
DT.4363 is same but for TUD3, TUD5 diesels
- Refer to Application Charts
Flywheel Holding Tools
DT.3398, DT.4358 & DT.4359
DT.3398, DT.4358 & DT.4359
DT.3398, DT.4358 & DT.4359
DT.3398, DT.4358 & DT.4359
DT.3398, DT.4358 & DT.4359
Holding Tools for Crank Pulley Removal
Holding Tools for Crank Pulley Removal
Holding Tools for Crank Pulley Removal
Holding Tools for Crank Pulley Removal
Holding Tools for Crank Pulley Removal
IMPORTANT: Many timing belt replacement application require removal of the crankshaft pulley. However Locking Pins must NOT be used
to hold the crankshaft whist releasing or tightening the pulley bolts. Locking Pins are for retention of timing position only.
Use appropriate Flywheel Holding Tool DT.3398, DT4358 or DT.4359 – Refer to Application Charts.
Section 2:
DW8 and HDi
DIESEL ENGINES
DT.4566 Crankshaft Pulley Remover

Publicidad

loading