Using The Appliance - Fagor 3FE-8112 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USING THE APPLIANCE

Select Programme
1
Time Remaining
2
To set the Time Remaining:
Close the appliance door.
Set the programme selector dial to the desired programme (see table).
Select additional functions or wash cycle parameters as required – depending on the
needs.
Press the Time Remaining button.
Select time remaining ranging from 1 to 23 hours.
Press the Start/ Pause button The appliance will be set in delay mode.
The wash programme will be automatically terminated.
When you set the Time Remaining option, the display will show the time remaining to the end
of the programme.
End of the wash cycle
3
Your machine will stop by itself as soon as the programme you have selected finishes.
You can open the machine's door and remove the laundry.
Leave the door of your machine open to allow the inner part of your machine to dry.
Switch the programme dial to STOP position.
Unplug your machine.
Turn the water tap off.
Cancel or modify programme
4
Turn the programme dial to the "STOP" position.
Your machine will stop the washing operation and the programme will be cancelled.
Turn the programme dial to any other programme to drain the machine.
Your machine will perform the necessary draining operation and cancel the
programme.
You can now select and run a new programme.
90
Set the programme selector turning it left or right.
Customize the programme to your needs – you can change the temperature, spin
speed, or enable additional features.
Press the Start/ Pause button
"- -" will flash on the electronic display.

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido