Using The Appliance - Fagor 3FE-8612 Manual De Instrucciones

USING THE APPLIANCE

Select Programme
1
Set the programme selector turning it left or right.
Customize the programme to your needs – you can change the
temperature, spin speed, or enable additional features.
Press the Start/ Pause button
Time Remaining
2
To set the Time Remaining:
Close the appliance door.
Set the programme selector dial to the desired programme (see table).
Select additional functions or wash cycle parameters as required –
depending on the needs,
Press the Time Remaining button.
Select time remaining ranging from 1 to 24 hours.
Press the Start/ Pause button The appliance will be set in delay mode.
The wash programme will be automatically terminated.
When you set the Time Remaining option, the display will show the time remaining to the
end of the programme.
End of the wash cycle
3
End of the wash cycle is indicated by acoustic signal (if
active). 30 seconds after the end of the wash programme,
END appears on the display, washing machine turns off
automatically, the display turns off, the door is unlocked and the
washing machine will be in off mode).
Close the water valve.
Unplug the appliance from the mains.
Open the door and remove laundry.
Cancel or modify programme
4
Press and hold the Pause button for 3 seconds to reset a programme.
101