Maintenance And Cleaning - Fagor 3FE-8112 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE AND CLEANING

The pump filter system in your Washing Machine prolongs the life of the pump by prevent-
ing lint from entering your machine. We recommend that you clean the pump filter every 2
months.
Clean the pump filter
1
The pump filter is located behind the cover on the front-lower right corner. To clean the
pump filter:
To clean the pump filter:
1. You may use the washing powder spade (*) supplied with your machine or liquid detergent level plate
to open the pump cover.
2. Lodge the end of the powder spade or liquid detergent level plate in the opening of the cover and
gently press backwards. The cover will open.
• Before opening the filter cover, place a container under the filter cover to collect any water left in the
machine.
• Loosen the filter by turning anticlockwise and remove by pulling. Wait for the water to drain.
NOTE: Depending on the amount of water inside the machine, you may have to empty the water
collection container a few times.
3. Remove any foreign materials from the filter with a soft brush.
4. After cleaning, re-fit the filter by inserting it and turning clockwise.
5. When closing the pump cover, ensure that the mountings inside the cover meet the holes on the front
panel side.
6. Close the filter cover.
WARNING: The water in the pump may be hot, wait until it has cooled down before carrying out any
cleaning or maintenance.
(*) Specifications may vary depending on the machine purchased.
95

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido