Each bike requires 3 chain straps.
\
stabilizer
To slide cradles along the carrier
arms, close cradle and stabilizer.
Close cradles while loading bikes.
tigHten uppeR anD siDe stRaps
again afteR biKes aRe lOaDeD.
The weight of the
bikes may cause
the straps to slack
or dislodge hooks.
1035818C - 8/27
tightly secure straps diagonally
over bike frame and seat tube.
The straps can be routed
under the cables.
loaD rEmaInIng bIkEs.
alternate bike directions
to avoid interference.
secure bikes
Use the included safety
strap to secure your
bikes to the carrier.
Route the strap through
each wheel, around the
carrier. Feed the strap
through the buckle,
tighten it down, and
secure the loose end.
befORe
DRiVing
away witH
yOuR biKes:
rEaD all
warnIngs on
nEXt pagE.