Yakima HoldUp 2 Manual De Instrucciones página 5

Ocultar thumbs Ver también para HoldUp 2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SECuRE THE HOOk.
Compress
the hook
against the
wheel by
applying
firm
pressure.
LOAd SECONd BIkE (IF APPLICABLE).
If necessary adjust tray position to avoid bike to bike interference.
If you have bike to bike
interference when loading
two bikes, adjust trays as
necessary to eliminate
interference between bikes.
• loosen the 4 tray bolts (do
not remove bolts).
• Slide the tray left or right.
• retighten the 4 tray bolts.
• Both trays can be adjusted.
1034426J-5/21
SECuRE REAR
WHEEL STRAP.
Feed the strap through
the spokes of wheel.
Rotate the wheel
slightly, if necessary.
TIGHTEN REAR
WHEEL STRAP.
• Thread strap through
spokes and insert it into
the slot in the wheeltray.
• pull hard to tighten.
• Alternate bike direction.
• refer to steps 10 through 14
to load your second bike.
4X

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Holdup

Tabla de contenido