Installation; Pairing The Camera To The Recorder - Abus TVAC18010C Manual De Instrucciones

Rear view


5. Installation

5.1 Pairing the camera to the recorder

To connect a camera with the recorder, proceed as follows:
1. Connect the camera and the recorder to the power supply.
2. In the recorder menu, select "Camera", then "Pair" and the required
camera (1-4). The system counts down from 60 seconds.
3. Press the PAIRING button briefly on the camera cable during these 60 seconds.
4. The LINK LED is lit up continuously once the connection is established.
Note:
Please note that connection can take up to 60 seconds.



12

SMA connector

Microphone

Pairing button

Power supply connection
English