Perel CCTVSET10 Manual Del Usuario página 12

7.3.4.4 DISPLAY
Use the Display Setup menu to customize channel titles, show/hide the date and time in live viewing
and playback, and enable/disable preview channels.
To customize Display settings:
1) Configure the following options:
o NAME: click any of the fields and enter a new title for the selected channel using the Virtual
Keyboard (mouse only)
o POSITION: reposition the channel title; select TOPLEFT, BOTTOMLEFT, TOPRIGHT,
BOTTOMRIGHT or OFF. If OFF, the title will not be displayed for the selected channel
o COLOR: Adjust CHROMATICITY, LUMINOSITY, CONTRAST, and SATURATION for the
selected channel
o PREVIEW TIME: select ON/OFF to show/ hide the date and time during live viewing
o RECORD TIME: select ON/OFF to show/hide the date and time during playback.
2) Click NEXT PAGE to change the settings for the remaining channels (8-channel models only).
3) Click APPLY to save your settings. Click SURE in the confirmation window.
Preview
Preview channels can be very useful if your display monitor is in public view. Select OFF of a
preview channel will appear black on the display to give the impression that no cameras are
connected and the system is not recording.
To enable/disable preview channels:
1) Choose a channel you wish to conceal. For example, channel 3. Under PREVIEW, select OFF.
2) Click APPLY. Channel 3 will turn black. Click CLOSE in the confirmation window.
3) Click EXIT in all menus until al windows are closed.
7.3.4.5 AUDIO
Use the Audio menu to set the resolution and camera system on the system.
To configure video options:
1) Under CAMERA SYSTEM, select NTSC or PAL.
2) Click APPLY. Click CLOSE in the confirmation window.
3) Click EXIT in all menus until all windows are closed.
To configure audio options:
1) From the Audio menu, click VOLUME SETUP. A split-screen display view appears.
2) Click any channel and adjust the slider to increase/decrease the volume for listen-in audio.
3) Click X to return to the Audio menu.
4) Click APPLY. Click SURE in the confirmation window.
5) Click EXIT in all menus until all windows are closed.
LOOP TIME:
1) Click the input box to set.
2) Left click to exit, Click SURE in the confirmation window.
3) Click EXIT in all menus until all windows are closed.
26/05/2011
CCTVSET10
12
©Velleman nv