Perel CCTVSET10 Manual Del Usuario página 19

8.2 Remote surveillance main screen
Upon login, the Remote Surveillance main screen appears in your browser.
1) Modes: Click LIVE, PLAYBACK or SETUP.
2) Main Screen: Main display screen for live viewing and playback.
3) Time Stamp: Time stamp appears on each channel.
4) Channel: Channel number appears in the top left corner.
5) PTZ Control: PTZ control for any connected PTZ cameras (not included).
6) Functions: Click the icons to show/hide channels, take screen captures, and record.
7) Display Modes: Click the icons to view channels in single-channel full-screen, quad, and split-
screen configurations.
8) Volume/Mute: Select a channel (outlined in red) and then click the bars to increase/decrease
volume; click the icon to mute/un-mute volume.*
8.2.1 Live viewing
By default, remote surveillance opens in Live Viewing mode (split-screen).
To use Live Viewing:
1) Click LIVE at the top of the main screen.
2) Click the display mode icons to view the main screen in single-channel, quad, or split-screen
configurations. You can also double-click a channel at any time to view it in single-channel.
3) Click
4) Click
RECORDING.
5) Select a channel (outlined in red) and then click the audio bars to increase or decrease listen-in
volume*. Click the icon to mute/un-mute.
NOTE: The Talk function is not supported.
8.2.1.1 RECORDING
You can record video directly to your PC using the remote surveillance software.
To record video to your PC:
From Live viewing, click to start/stop manual recording to your PC on ALL channels
NOTES:
• You will record video to your PC regardless of the recording mode on the system itself.
• By default, recorded files are saved in C:\DVR\[ip_address]\Record.
26/05/2011
*Audio capable cameras (not included) required for audio listening and recording.
to show or hide all the channel windows.
to start/stop manual recording to your PC on ALL channels. For more details see
*Audio capable camera (not included) required for listen-in audio.
CCTVSET10
19
©Velleman nv