Perel CCTVSET10 Manual Del Usuario página 15

7.3.5.4 MOBILE
Send alerts to your cellular phone Windows Mobile enabled touch-screen smart phone (Windows
Mobile 6.0 or greater, S60 3
To configure mobile notification settings:
1) Under MOBILE NETWORK, select 3G,2.75G, or 2.5G.
NOTE: Contact your cellular provider if you are unsure about the network of your cellular
phone.
2) Under MOBILE PORT, enter your mobile port number.
3) Click APPLY. Click SURE in the confirmation window.
4) Click EXIT in all menus until all windows are closed.
7.3.5.5 MAINTAIN
Use the System menu to update system firmware and set an automatic system reset schedule.
To enable auto-reset:
1) Under AUTO RESET, select ON. The Settings option appears.
2) Under SETTINGS, select EVERY DAY, EVERY WEEK, or EVERY MONTH. The date drop-down
menu appears.
3) Select the date for auto-reset from the drop-down menu.
4) Enter the time for auto-reset using the virtual keyboard (mouse only).
5) Click APPLY. Click SURE in the confirmation window
To restore factory settings:
1) Click DEFAULT SETTINGS. This will restore the system to the original factory settings.
2) Click OK in the prompt.
NOTE: Recorded video on the HDD will not be erased.
To restart the machine (soft-reset):
1) Click RESTART.
2) Click OK in the prompt. The system will perform a soft-reset and load to a live split-screen view.
To upgrade firmware:
1) Copy the firmware file to an empty USB flash drive. The firmware file should not be in a folder.
2) Connect the USB flash drive to the USB port on the front panel of your system.
3) Open the System Menu (Main Menu>Advance>Maintain).
4) Click FIRMWARE UPDATE. The system will scan the USB flash drive and begin updating the
firmware. Do not remove the USB flash drive while the upgrade is taking place.
5) Click SURE in the confirmation window. In the system prompt, click OK. The system will
restart.
PARAMETER EXPORT: Copy the system settings of the device to an empty USB flash drive.
PARAMETER IMPORT: Import system settings from another device.
26/05/2011
CCTVSET10
rd
generation or greater is required).
15
©Velleman nv