FH-102994.1
PARTS DESCRIPTION
1.
Heat select switch
2.
Air outlet grille
3.
Thermostat control switch
HEAT SETTING
"MIN-MAX" –select the temperature
"0"position – OFF
– Ventilation
–Ventilation & low temperature
–Ventilation & high temperature
OPERATION
1. Connect on the power.
2. Rotate the switch, choose the suitable one (ventilation/ventilation & low temperature/ ventilation &
high temperature).
3. Turn the thermostat to choose the temperature, the heater begins to work.
4. After power-off, the fans will go on wheeling if inner temperature is higher than 50°C, until the
temperature is lower than 50°C then the fans will stop.
WARNING
If you want to shut down the heater, please first switch it off. Do not cut the power directly until the heater
stops automatically.
SAFETY SYSTEM
The appliance has a safety system which automatically switches the unit off when overheated.
If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down
for at least 10 minutes. Put the plug in the socket and switch the heater on.
MAINTENANCE
The fan heater only needs regular cleaning on the outside.
Before you clean the unit, turn the switch off. Remove the plug from the socket and wait until the fan
heater cools down completely.
Use a damp cloth to wipe the heater housing.
Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the
appliance.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60Hz
Power consumption: 3000W
Recycling
This marking indicates that this product should not be disposed with other household wastes
throughout the 2012/19/EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this product for environmental safe
recycling.
- 59 -
GB