Beurer BM 77 Manual De Instrucciones página 35

Ocultar thumbs Ver también para BM 77:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
Measurement
Max. permissible standard deviation
inaccuracy
according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Memory
2 x 60 memory spaces
Dimensions
L 175 mm x W 117 mm x H 50 mm
Weight
Approx. 478 g (without batteries)
Cuff size
24 to 40 cm
Permissible operating
+10 °C to + 40 °C, 15 % – 85 % relative
conditions
air humidity (non-condensing)
Permissible storage
- 10 °C to + 60 °C, 10 % – 90 % relative
and transport condi-
air humidity, 700 –1060 hPa ambient
tions
pressure
Power supply
4 x 1,5 V
Battery life
For approx. 120 measurements, de-
pending on the blood pressure level
and/or pump pressure
Accessories
Cuff, cuff holder, instructions for use,
4 x 1.5 V AAA batteries, USB cable,
storage pouch
Classification
Internal supply, IP21, no AP or APG,
continuous operation, application part
type BF
AAA batteries
35
Data transfer via
The blood pressure monitor uses
Bluetooth® wireless
Bluetooth® (Bluetooth® low energy
technology
technology),
2.4 GHz frequency band,
Compatible with Bluetooth 4.0 smart-
phones/tablets
List of supported smartphones/tablets
Technical information is subject to change without notification
to allow for updates.
• This unit is in line with European Standard EN 60601-1-2 and
is subject to particular precautions with regard to electro-
magnetic compatibility (EEC). Please note that portable and
mobile HF communication systems may interfere with this
unit. More details can be requested from the stated Customer
Service address or found at the end of the instructions for use.
• This device is in line with the EU Medical Devices Directive
93/42/EEC, the "Medizinproduktegesetz" (German Medical
Devices Act) and the standards EN 1060-1 (non-invasive
sphygmomanometers, Part 1: General requirements),
EN 1060-3 (non-invasive sphygmomanometers, Part 3:
Supplementary requirements for electro-mechanical blood
pressure measuring systems) and IEC 80601-2-30 (Medical
electrical equipment – Part 2 – 30: Particular requirements
for the safety and essential performance of automated non-
invasive blood pressure monitors).

Publicidad

Tabla de contenido
loading

Tabla de contenido