Usb Play Operation; Sd/Mmc Operation - Lenco CS-315 Manual Del Usuario

individual segment is turned on.
TA interruption function
The current traffic announcement is
cancelled by pressing this key.
But the TA mode will not be off.
Broadcast
expressed in alphanumerically characters
AF: Alternative Frequencies
Frequency list of broadcasting stations
transmitting the same program
TP: Traffic Program Identification
Identification
information-broadcasting station
TA: Traffic Announcement
Identification
Identification data
information is being transmitted or not
PTY: Program Type Code
Contents of programs such as news, light
music, sports etc

USB PLAY OPERATION

On the front panel of the unit, there is an
USB interface (11). You can connect an
USB driver through this interface .
When you connect an USB driver through
the interface, the unit will search the MP3
or WMA files in the USB driver and start to
play MP3 or WMA files automatically.
If in other mode, you can also press MODE
button (1) to select USB mode.
The operation please refer to the following
instruction.
SELECTING SONGS IN SINGLE STEP
Press / button (2) to move to the
previous song or the following song. File
number shows on display. Press and hold
/ button (2) to fast reverse or fast
forward. CD play starts from when you
release the button.
SELECTING DIRECTORY UP/DOWN
Press DIR button (13) or DIR
+
to select directory downward or upward.
If the MP3 disc does not contain any
directory, there is no function of
pressing DIR
-
station name
data for
showing
button (14)
-
button (14) or DIR
button (13).
PAUSING PLAYING
Press PAU button (19) to pause playing.
Press it again to resume playing.
PREVIEWING ALL FILES
data
Press INT button (18) to INTRO each file
stored in USB device. Shortly press again
to stop intro and start to play.
REPEATING PLAYING
Press RPT button (17) for 1 time. It will
show "RPT ONE". It will continuously
traffic
repeat the same file.
Press RPT button (17) for 2 times. It will
show "RPT DIR". It will repeat all files of the
current directory.
traffic
Press RPT button (17) for 3 times. It will
show "RPT ALL". It will repeat all the files.
PLAYING IN RANDOM ORDER
Shortly press RDM button (15) to play all files
in random order. Press it again to cancel the
function.
CAUTION： ： ： ：
When there are important files in the USB
device, do not connect it to the main unit to
play, because any wrong operation may
cause
assumes no responsibility for this.

SD/MMC OPERATION

There is a SD/MMC interface (12) on the
front panel of the unit.
When you insert a SD/MMC card in the
SD/MMC interface, the unit will search the
MP3 or WMA files in the card and start
to play automatically.
The operation is the same with the USB
play operation described above.
If in other mode, you can also press MODE
button (1) to select SD/MMC mode.
When there are important files in the
SD/MMC card, do not connect it to the main
unit to play.
+
10
files loss. And our company