Clock Setting; Microwave Cooking - VOX electronics MWH MD20B Manual De Uso

OPERATION INSTRUCTION
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.

1.Clock Setting

When the microwave oven is electrified,the oven will display "0:00", buzzer will ring once.
" CLOCK/PRE-SET ", the hour figure flash;
(1) Press
(2) Turn " " to adjust the hour figures,
CLOCK/PRE-SET ", the minute figures will flash.
(3) Press "
(4) Turn " " to adjust the minute figures, the input time should be within 0--59.
CLOCK/PRE-SET " to finish clock setting. ":" will flash.
(5) Press "
Note: (1) If the clock is not set, it would not function when powered.
(2) During the process of clock setting, if no oppreation in 1 minute,
will go back to the previous status automatically.

2. Microwave Cooking

Micro wave "
(1) Press the "
Press " Micro wave "
(2)
power "P100", "P80", "P50", "P30", "P10" will display in order.
START/+30SEC./CONFIRM " to confirm.
(3) Press "
(4) Turn " " to adjust the cooking time. (The time setting should be 0:05- 95:00.)
START/+30SEC./CONFIRM " to start cooking.
(5) Press "
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
Microwave Power Chart
Microwave Power
Display
" key once, and "P100" display.
repeatedly or turn "
: 5 seconds
: 10 seconds
: 30 seconds
: 1 min ute
: 5 minutes
100% 80%
P100 P80
the input time should be within 0--23 .
" to select the microwave
30%
50%
P50 P30
11
the oven
10%
P10