Pre-Set Function - VOX electronics MWH MD20B Manual De Uso

Example: if you want to defrost the food for 5 minutes, then to cook with 80%
microwave power for 7 minutes. The steps are as following:
W.T./TIME DEFROST
(1) Press "
(2) Turn " " to adjust the defrost time of 5 minutes;
Microwave
(3) Press"
(4) Turn " " to choose 80% microwave power till "P80" display;
START/+30SEC./CONFIRM " to confirm;
(5) Press "
(6) Turn " " to adjust the cooking time of 7 minutes;
START/+30SEC./CONFIRM " to start cooking.
(7) Press "

7. Pre-set Function

(1) Set the clock
(2) Input the cooking program.
be set in preset function .
Example: if you want to cook with 80% microwave power for 7 minutes.
a. Press" Microwave " once;
b. Turn " " to choose 80% microwave power till "P80" display;
c. Press " START/+30SEC./CONFIRM " to confirm;
d. Turn " " to adjust the cooking time of 7 minutes;
After the above steps, please do not press " START/+30SEC./CONFIRM ". Then
do as following:
" CLOCK/PRE-SET ". The hour figures flash;
(3) Press
(4) Turn " " to adjust the hour figures,
Press " CLOCK/PRE-SET ", the minute figures will flash .
(5)
(6) Turn " " to adjust the minute figures,
START/+30SEC./CONFIRM " to finish setting. ":" will light, buzzer will
(7) Press "
ring twice when the time arrives, then cooking will start automatically.
Note: clock must be set first. Otherwise,pre-set function will not work.
" once;
first. (Consult the instruction of clock setting.)
Two stages can be set at most. Defrosting should not
" twice, the screen will display "dEF2";
the input time should be within 0--23.
the input time should be within 0--59.
13