VOX electronics KK3220F Manual De Usuario página 14

Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit
on something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It is preferable
1. Remove four screws in top cover and then lift it.
2. Unscrew top hinge and then remove upper door and place it
on a soft pad to avoid scratch.
3. Remove the pin with a screwdriver and flip the hinge
bracket. Then refit the pin to hinge bracket.
2 people to handle the unit during assembly.
11