Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
To reduce the risk associated with hazardous voltage:
-
Periodically inspect the Power Supply and its power cord for damage. If either is damaged, return
the Power Supply and Battery Charger to a 3M authorized service center.
-
Do not attempt to disassemble, modify or service the 3M™ PPS™ SUN GUN™ II Battery Pack,
Battery Charger, or Power Supply – there are no user-serviceable parts. For service, return both the
Power Supply and Battery Charger to a 3M authorized service center.
-
Do not expose the 3M™ PPS™ SUN GUN™ II Battery Pack, Charger or Power Supply to a wet or
damp environment.
-
The 3M™ PPS™ SUN GUN™ II Battery Charger and Power Supply are NOT designed or intended
for use outdoors. They are intended for indoor use ONLY.
-
Do not allow liquids of any kind to enter the 3M™ PPS™ SUN GUN™ II Battery Pack Charger and
Power Supply.
•
To reduce the risk associated with fire and explosion:
-
Never use the 3M™ PPS™ SUN GUN™ II Light, Battery Pack, Battery Charger or
Power Supply in potentially explosive or flammable environments.
-
Do not use while mixing, spraying, or applying combustible or flammable materials, or in the
presence of any flammable or combustible vapors.
-
Never store the 3M™ PPS™ SUN GUN™ II Light, Battery Pack, Battery Charger
or Power Supply where there is the possibility for contaminate build-up.
-
Do not leave the 3M™ PPS™ SUN GUN™ II Light turned on while unattended.
-
Do not allow the 3M™ PPS™ SUN GUN™II Lens to come in contact with any combustible surface.
-
Do not allow any flammable liquids to enter the 3M™ PPS™ SUN GUN™ II Light, Battery Pack,
Battery Charger or Power Supply.
-
Periodically inspect the 3M™ PPS™ SUN GUN™ II Battery Pack for damage – if damaged, replace
the battery and dispose of the damaged battery as required by applicable law.
-
Do not use a dropped 3M™ PPS™ SUN GUN™ II Battery Pack. Replace the Battery Pack with
PN16555 if it is dropped.
-
Use only the designated 3M™ PPS™ SUN GUN™ II Battery Pack (PN 16555) in the 3M™ PPS™
SUN GUN™ II Light. Use of another battery pack may present a risk of fire or explosion.
-
Use only the 3M™ PPS™ SUN GUN™ II Battery Charger and Power Supply (PN 16556) for
charging the battery pack
-
Never replace the power cord with one that is inadequately rated for this device.
-
Always follow OSHA and other applicable governmental workplace regulations.
-
Promptly dispose of or recycle the used 3M™ PPS™ SUN GUN™ II Battery Pack in accordance
with Federal, State and Local requirements. Keep away from children. Please see detailed
instructions for recycling in the Battery section.
-
Do not dispose of the 3M™ PPS™ SUN GUN™ II Battery Pack in a fire.
-
Do not use any cleaning solvents other than a mild soap solution on a cloth to clean the 3M™
PPS™ SUN GUN™ II Light, Battery Pack, Battery Charger, Power Supply, Diffuser, or Light Bulb
Lens.
•
To reduce the risk associated with high intensity light:
-
Never allow the light source to be directed toward a person's eyes.
WARNING
2
Publicidad
Tabla de contenido
Solución de problemas
