Health & Safety - 3M PPS SUN GUN II Manual De Instrucciones

Health and Safety Information
Device Safety Compliance
The 3M™ PPS™ SUN GUN™ II Color Matching Light System complies with standard IEC/EN 61010-1,
3 rd edition, as demonstrated by the CB Scheme Certificate and test report issued issued by Underwriters
Laboratories Inc. (UL).
The 3M™ PPS™ SUN GUN™ II Color Matching Light System is listed as Laboratory Equipment and carries
the UL and c-UL marks based on compliance to the standards UL 61010-1 and CAN/CSA-C22.2
No. 61010-1.
The 3M™ PPS™ SUN GUN™ II Color Matching Light System available in European markets is CE marked
because it complies with the requirements of the Low Voltage Directive 2006-95-EC, the EMC Directive,
2004-108-EC and the RoHS II Directive, 2011/65/EU, as confirmed in the Declaration of Conformity , which
is available on request.
FCC Compliance Information
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide a reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their expense.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Industry Canada Compliance Information:
This Class A digital apparatus complies with Canadian ICES-003.
Battery
The RBRC™ (Rechargeable Battery Recycling Corporation) seal on the NiMH (Nickel Metal Hydride) battery
(Battery Pack) is your indication that 3M has paid in advance the costs to recycle the battery (Battery Pack)
at the end of its useful life. In some areas it is unlawful to place Nickel Metal Hydride batteries in the trash
or municipal solid waste stream. The RBRC program provides an environmentally responsible alternative.
RBRC, in cooperation with 3M and other battery users, has established programs in the United States
to facilitate the collection of used NiMH batteries. Help protect our environment and conserve natural
resources by calling 1-800-822-8837 to find a location to recycle used batteries, or call your local
recycling center to learn where in your area to drop off the used battery.
4