Bt5-Bt6 Electronic Programmer Instructions (Models Fi-64/74 Mtb-Wtb) - Smalvic FI-74MT Manual De Instrucciones

ELECTRONIC PROGRAMMER B (MODELS FI-64/74 MTB-WTB)
Clock
Timer
Oven on
Cooking time
Cooking end time
Decrease num.
Increase num.
A
Automatic
Man
Manual
Safety lock
This programmer functions with touch system, operate on the
commands by exerting slight pressure in the area indicated
by the symbols.
Activation and adjustment of the time
Once the current is connected, the flashing
12:00 appear on the display; the h:min symbol appears.
By touching one of the three symbols
stop flashing. Time adjustment is now possible. By maintaining
pressure constant, the increase is continuous. After a few
seconds the time is fixed.
Selecting/annulling programs
The programs are selected by pressing the SEL symbol and
scrolling the menu The Man symbol indicates that the oven is
in manual mode. The symbol
performing a program. To annul a program, take the values set
to 0:00.
10
symbol and
SEL all signals
indicates that the oven is not
Manual operation
The programmer must be activated, the Man symbol illuminated
and operation performed on the knobs. The TIMER function can
be used in all cases.
Semi-automatic operation
programming)
Operate on the SEL symbol until the appearance of the flashing
, numbers 0:00 and h:m symbol, set cooking duration by
operating on the symbols. The
symbol, the actual time and the Auto symbol appear. Turn the
knob to the values desired. An acoustic signal indicates the end
of cooking, the Man symbol starts to flash and the oven turns
off. To stop the acoustic signal, operate on any of the symbols.
Press SEL again to exit programming.
Semi-automatic operation
programming)
Touch the SEL symbol until
set the desired cooking end time.
After a few seconds, the symbol switches off, the clock time
re-appears and the Auto and
the two knobs to the desired temperature and cooking time.
When the set time is reached, the acoustic signal indicates the
end of cooking, the Man symbol starts to flash and the oven
turns off. To stop the acoustic signal, operate on any of the
symbols. Press SEL again to exit programming. Programming
can be annulled by taking the cooking time to 0:00.
Automatic operation (deferred cooking start
setting)
Operate on the SEL symbol until the appearance of flashing
set the desired cooking time (using
the flashing symbol and set the desired cooking end time.
After a few seconds, the symbol switches off
re-appears and the Auto symbol switches on. Turn the knobs
onto the desired functions and temperatures. The oven remains
off and will turn on automatically according to what you set.
When the set time is reached, the acoustic signal indicates
the end of cooking, the Man symbol starts to flash and the
oven turns off. Turn the knobs to the off position. To stop the
acoustic signal, touch any of the symbols. Press SEL again to
exit programming. Programming can be annulled by taking the
cooking time to 0:00.
Timer function
Operate on the SEL symbol until the flashing
numbers 0:00 and the min:sec symbols appear. By touching
the symbols, the desired time is set. The programmer will start
the countdown. On reaching the time set, the acoustic signal is
triggered. Touch any symbol indifferently to stop the acoustic
signal. To annul this function, take the timer to 0:00. This
function can be used for manual cooking.
(cooking duration
remains fixed and the
(cooking end
. appears. By operating on the
symbols switch on. Now turn
). Still using SEL go to
the clock time
symbol, the