3.10 Symbols
The following symbols are on the device:
Observe the user manual
>ABS<
Material designation of the plastic
CE-mark and number of the notified
body according to Medical Device
Directive 93/42/EEC
Standby push-button
Mist volume
Air volume
Timer
Device with application part, type B
Device of protection class I
Only suitable for indoor use
Protect from moisture
AC voltage
IP 22
Dripping water protected
Device fuse
Labelling in accordance with EC
Directive 2002/96/EC (Waste Electrical
and Electronic Equipment Directive)
Symbol for "Do not dispose of product
at municipal collection points for used
electrical equipment"
34
4.
Safety information
D WARNING!
The ventilation slots must not be covered by objects,
otherwise the device will not operate correctly and
the aerosol nebulisation will be destroyed.
D WARNING!
Risk of infection! Observe hygiene regulations!
− The applicable hygiene rules must be complied
with to avoid infection or bacterial contamination.
Observe the intended use of the bacteria filter.
Always wear gloves during work.
− Contaminated device parts may endanger the
patient's health. Before use, the device must
be treated in accordance with the operational
hygiene regulations.
D WARNING!
Danger of injury!
The optional heating tube connection on the
underside of the device must not be touched at the
same time as the patient.
D ATTENTION!
Damage!
The device must be checked for damage (housing,
etc.) and safety-related defects every time before
use. Damaged devices must be serviced by an
authorised party before reuse. All work that
requires the use of tools must be performed by
the manufacturer or a party authorised by the
manufacturer.
D ATTENTION!
Power supply!
The mains power supply must concur with the
specifications on the type plate. Unplug the mains
plug before cleaning. Prevent any liquid penetrating
the device interior.
Safety information
96200-114 – 10 – 15.07.2020