Main Switch; Function Description / Frequently Used Functions - Krömker UltraNeb Instrucciones De Uso

12
14 15

12 Main switch

13 Mounting bracket
14 Device socket
15 Voltage selector
16 Connection socket for heating tube (accessories)
17
18 19
17 Retainer part for nebuliser chamber
18 Standby push-button
19 Mist volume push-button
20 Air volume push-button
21 Timer push-button
38
13
16
20 21
5.7 Function description / frequently used
functions
In the ultrasonic nebuliser USV 2010, high
frequencies are generated by an oscillating
quartz which converts liquids inside the nebuliser
chamber into ultra-fine mist. The mains cable (10)
is plugged into the device socket (14). Pay attention
to correct connection values in accordance with
the information plate. The ultrasonic nebuliser is
switched on with the main switch (12) located on the
back of the unit. The aspirated air is guided through
the bacteria filter (4) via the 300 mm tube into the
nebuliser chamber (11). The mist of liquid produced
by means of oscillating quartz inside the nebuliser
chamber (11) is conducted with the generated air
flow through the patient tube (5) to the vicinity of
the patient's respiratory organs.
Standby push-button
☞ Switch on the device with the standby button [1]
on the front of the device.
− Green LED [2] lights ups/field designation:
− The device starts nebulising.
NOTE:
In case of faults, the red LED [3] lights up.
Device description
96200-114 – 10 – 15.07.2020