Insert Hose; Accessory Storage; Hose Storage; Cord Storage - Craftsman CMXEVBE176560 Manual De Instrucciones

Insert Hose (Fig. N)
1. Insert the Locking End of the Hose Assembly into the
Vac Inlet Port. The Hose should snap into place.
2. To remove the Hose from the Vac, press the Release
Button and pull the Hose out of the Vac Inlet Port.
Fig. N
Hose
Accessory Storage (Fig. O)
Your Accessories may be stored in the Caster Feet, Storage
Locations on the Powerhead Assembly or in the Accessory
Storage Bag.
Fig. O
Caster Feet Storage
for Accessories
Hose Storage (Fig. P)
The Hose may also be stored by wrapping it around the
Powerhead Assembly and securing it into the Hose Clips.
Fig. P
Vac Inlet
Release
Button
Cord Storage (Fig. Q)
Wrap the Power Cord around the Carry Handle/Power Cord
Wrap located on the Powerhead Assembly Carry Handle.
Snap the Power Cord into the Cord Clip to secure.
Fig. Q
Storage Bag
Powerhead
Assembly
Storage for
Accessories
Hose Clips
Hose
Powerhead
Assembly
Carry Handle/
Power Cord
Wrap
Cord
Clip
9