General Safety Instructions - SATA 244 Instrucciones De Servicio

<< Operating instructions SATA filter 244/264/284 >>
6. Safety Instructions

6.1. General Safety Instructions

• Before using the filters, please read the safety and operating instruc-
tions completely and carefully. Safety instructions and specified steps
are mandatory.
• Keep all enclosed documents and pass on the filter together with
these documents only.
6.2. Filter Specific Safety Instructions
• Local safety, accident prevention, work and environment protection
regulations are mandatory!
• Use, cleaning and maintenance by skilled personnel only!
• Never use the filter when it is damaged or when components are
missing!
• Check and, if necessary, repair the filter on a regular basis!
• Put filter out of operation immediately when it is damaged!
• Never carry out unauthorised or technical modifications on the filter!
• Use original SATA spare parts and accessories only!
6.3. Use In Explosive Areas
The filter is approved for the use in explosive areas classified as Ex-zone
1 and 2.
The SATA filter 244/264/284 due to their conception, design and construc-
tion comply with the basic safety requirements of the directive 94/9/EU.
The respective documents required by directive 94/9/EU Annex VIII are
deposited for 10 years at the designated location, number 0123 with the
documentation number 70023722.
7. Assembly
7.1. SATA filter 244 and 284
• Install mounting bracket [1-2] on the filter
• Install the filter vertically on the wall with screws, thus ensuring full
Warning! Attention!
Warning! Attention!
EN
III.3