Set- Up Before Use; Brush Assembly - Kokido DELTA 200 Manual De Usuario

Ocultar thumbs Ver también para DELTA 200:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
• Immediately disconnect the external adaptor from the power source if you detect any of the
following:
4. When charging is complete, disconnect the external adaptor from the power source and unplug the
charging plug from the unit and external adaptor.
Normally the robot can operate up to 90 minutes on a full charge.
NOTE: Clean the debris compartment regularly. Excessive debris inside the debris compartment increases the burden to the
motor operation and shortens the operating duration as a result.
NOTE: Rechargeable lithium-ion battery is classified as a consumable item. It has a limited life and will gradually lose its
capacity to hold a charge. Therefore, the running time of the robot will gradually reduce after repeated charging and
discharging throughout its product life.
Once the lifespan of the battery reaches its end, refer to section "BATTERY DISPOSAL" for instructions regarding battery
disposal and replacement of swivel head.
NOTE: Let the robot rest for around 30 to 40 minutes before charging it again.

Set- up Before Use

Brush Assembly

TIPS: Press on the two hook ends to remove the brush.
5
- Offensive or unusual odor
- Excessive heat
- Deformation, cracks, leaks
- Smoke
(attach to the end of the base, above the grip)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rc26

Tabla de contenido